Metal Mesh Backing Pre Filter Media

A great type of filter media for making pleated air filters with frames. Constructed with non-breakable PET synthetic fiber and covered with a mesh layer, it is very easy to form a pleated shape that meets your needs perfectly.

It is commonly used in HVAC and air control systems for prefilter or primary filter purposes. The laminated air filter media is well suited for harsh air environments to block bigger particles at the beginning of air filtration.

In addition to its high dust holding capacity and low pressure drop, filters with this media experience a longer filter life so that you can cut down the filter change, leading to a lower cost.

Product features

1.large dust holding capacity, the low pressure loss in the initial period and larger air flow.
2.The filtration material compounds with the material net, and is designed into the foldaway, which will provide the current air with the largest filtration area, 5 times’ filtration area as the common plane mesh. Paper frame and metal frame are available, which is convenient for replace, less purchasing expense.
3.The moisture-proof: 100%;
4.Heat resistance: 80℃;

Application
Pre-filtration of air conditioning and ventilation systems to avoid ash pollution inside the system
Pre-filtration of large air compressor Clean room centralized ventilation and air conditioning system and return air filtration to extend the service life of the high efficiency filter in the rear section
Ventilation system for general industrial plants to meet general cleaning requirements for air Rough dust filtration system of air conditioning in general construction building.

Technical Parameters

Material	Synthetic fiber
Filter class	G2-G4
Filter Objects	1 μm the particle
Average Efficiency	≥98% (ASHRAE52.1-1992)
Final resistance	400Pa
Size	0.61150m 0.615150m
Dust Holding Capacity	300g/㎡
Moisture resistance(relative humidity)	100%
Resistant temperature	100℃
Instant temperature	120℃